|
|
Quebec Tango on station
at the Seawork 2001 Exhibition in Southampton
Swordfish was officially launched at the show and the response
was fantastic!!We had over 65 quality enquiries over the
three days of the show.
|
| |
|
|
"I can't believe
the room down there and still a flush deck"
The usual post-launch party! This party was for a boat called
"CJ" and has been successfully fishing out of
Holland for a number of years now.She was fitted with a
John Deere unit.
|
|
| |
|
|
|
The rear of the wheelhouse
complete with the optional deck fridge, and cushions.
Also the Engine hatch is fitted with gas struts to enable
the hatch to be lifted effortlessly, again fitted with lockable
heavy-duty catches.
|
|
|
|
|
The launch of QT at Cobbs
Quay in Poole in June 2001
|
|
|
|
|
|
|
"Now that looks the
business"
The unique, stylish and very practical and functional Swordfish
heavy duty polished stainless steel handrails and backing
plates.
|
| |
|
|
Principle Dimensions
Moulded Length 30ft 6ins
Moulded Beam 11ft 6ins
Moulded Draft 3ft 6ins
|
|
| |
|
 |
"Are you sure she's only 30ft 6ins"
|
| |
|
|
The underside is moulded with clear gel
coat and finished with three layers of epoxy resin &
AntifouledStainless steel rudder mounted in bronze heavy-duty
bearings.
Stainless Steel skeg.
Four bladed propeller
Three Anodes, Bronze grated water intakes
All skin fittings fully bonded.
|
|
| |
|
|
|
The Hull is fully bolted and bonded to
ring deck moulding.
Diving/bathing platform is manufactured in GRP and fitted
with Stainless steel fasteners and stays, with two flush
mounted teak grids and finished of with 3 ins D fendering
and stainless steel end caps
|
| |
|
|
GRP Moulded Topside finished with a seven
layer Awlgrip Paint System
4 ins Marine grade D Fendering SystemAll skin fittings Brass/Bronze
marine grade and Chrome plated, Fully polished Stainless
Steel Stem Band, stainless steel scupper guards, aft quarter
covers & exhaust outlet c/w hinged flap.
|
 |
| |
|
|
|
"Let me in there"
The surprisingly roomy interior of the Swordfish 30 showing
the twin single bunks finished in high gloss cherry and
fully foamed and heavy duty vinyl
|
| |
|
"What! more space"
Entrance to the very roomy double birth along side the
teak and stainless steel step up to the wheelhouse.
|
|
| |
|
|
|
Quebec Tango's wheelhouse configuration
complete with Simrad electronics including VHF Radio DSC,
Radar, GPS, Plotter, Echo Sounder/ speed log/Sea Temperature
and Autopilot. Compass with backlight.FM/MW/LW Radio Cassette.
Finished and edged in High Gloss Cherry and fully carpeted
in marine grade heavy-duty carpet. All Furnishing are heavy-duty
marine grade Draylon.Heavy Duty Anodised Aluminium Tinted
Windows Side Opening
|
| |
|
|
"Now that's what I call a door"
The highly polished Stainless Steel heavy-duty wheelhouse
door surround fully bolted in domed nuts.
|
|
| |
|
|
|
"She's going to love it"
Quebec Tango's galley complete with two gas burner cooker
and grill, electric fridge, stainless steel sink complete
with hot and cold mixer tap, finished and edged in fully
polished stainless steel and high gloss cherry.
|
| |
|
|
"Mans best friend"
Quebec Tango's head fitted with manual flush toilet sink,
hot and cold mixer taps, electric extractor fan fluorescent
light, cupboard, mirror and teak grilled floor panel.
|
|
| |
|
|
|
"Look another fridge"
The fully carpeted floor complete with double 240 volt socket,
and all cupboards fully lined and finished.
|
| |
|
|
"Look at all those buttons"
Quebec Tango's Electrical Distribution Board mounted in
a Fully polished Stainless Steel Enclosure with all systems
fully protected via Trips and labelled.
|
|
| |
|
|
|
"Nearly There"
The fore deck is fitted with heavy duty polished stainless
steel Bollard 2 Off stainless steel fairleadsMoulded Antislip
deck finishMoulded toerails
|
| |
|
|
"What are we going to do with all
this space"
The Flush Deck showing the Aft Hold Access Hatch manufactured
in heavy-duty aluminium chequer plate and fitted with lockable
catches.The deck is finished in anti slip gelcoat
|
|
| |
|
|
|
"Cor now that is shiny"
Quebec Tango's Stainless fixtures and fittings are manufactured
in house and are finished to the highest standards.The fuel
and water fillers are all manufactured from 316 stainless
steel fully polished and again lockable.
|
| |
|
|
"Now that is a big ole"
The aft hold entrance showing the heavy-duty steps, anti
slip panel bilge pump and alarm fully housed in stainless
steel enclosure. Please note the drainage points and up
stands.
|
|
| |
|
|
|
"Oh that's where they are"
Quebec Tangos deck fridge for all those little extra's
|
| |
|
|
"Shut that door"
Quebec Tango's wheelhouse door finished inside with Formica,
which allows the door to remain open to the elements without
being harmed.Also showing the underside deck lights and
external waterproof speakers.Portside locker is also storage
for ropes, fenders etc and also the gas locker
|
|
| |
|
|
|
"I hope you like orange"
The heart of Quebec Tango is a Scania D19 55M 420/482 BHP
Six Cylinder Turbo Charged 310kw Unit fitted with a Twin
Disc 5085A Gearbox.This will push QT along at a healthy
24 Knots.
|
